Surface installation type heavy duty automatic flood barrier Hm4d-0006C

Short Description:

Scope of automatic flood barrier application 

The Model Hm4d-0006C hydrodynamic automatic flood barrier is applicable to the entrance and exit of underground buildings like underground parking lot, car parking lot, residential quarter, back street lane and other areas where only allow non-fast driving zone for small and medium-sized motor vehicles (≤ 20km / h). and low-lying buildings or areas on the ground, so as to prevent flood. After the water defensing door is closed down onto the ground, it can carry medium and small motor vehicles for non fast traffic.


Product Detail

FAQ

Product Tags

Model water retaining height Installation mode longitudinal width bearing capacity
Hm4d-0006C    620 surface mounted 1020 heavy duty (small and medium sized motor vehicles, pedestrian)

 

Grade Mark Bearing capacity (KN) Applicable occasions
Heavy duty C 125 underground parking lot, car parking lot, residential quarter, back street lane and other areas where only allow non-fast driving zone for small and medium-sized motor vehicles (≤ 20km / h).

Product installation

The model 600 can be installed on the surface or embedded. Models 900 and 1200 can only be installed in embedded system. The installation of flood barrier must be completed by a specially trained professional installation team, and shall be in accordance with schedule I (full automatic hydraulic power Flood gate – installation acceptance form) can be used only after passing the acceptance.

Note: if the installation surface is asphalt ground, because the asphalt ground is relatively soft, the bottom frame is easy to collapse after long-term rolling by vehicles; moreover, the expansion bolts on the asphalt ground are not firm and easy to loosen; therefore, the asphalt ground needs to be rebuilt with concrete installation platform as required.

Self closing flood barrier door

9

Pallet packing

10


  • Previous:
  • Next:

  •