Factory source Self Closing Flood Barrier Gate - Embedded flood barrier Hm4e-0012C – JunLi

Factory source Self Closing Flood Barrier Gate - Embedded flood barrier Hm4e-0012C – JunLi Featured Image
  • Factory source Self Closing Flood Barrier Gate - Embedded flood barrier Hm4e-0012C – JunLi
  • Factory source Self Closing Flood Barrier Gate - Embedded flood barrier Hm4e-0012C – JunLi
  • Factory source Self Closing Flood Barrier Gate - Embedded flood barrier Hm4e-0012C – JunLi

Short Description:


Download as PDF

Product Detail

FAQ

Product Tags

Related Video

Feedback (2)

We support our consumers with ideal good quality merchandise and large level provider. Becoming the specialist manufacturer in this sector, we have attained wealthy practical encounter in producing and managing for Quick Dam Automatic Flood Defense Gate , Flood Protection Gate , Water Flood Barrier , We warmly welcome friends from all walks of life to cooperate with us.
Factory source Self Closing Flood Barrier Gate - Embedded flood barrier Hm4e-0012C – JunLi Detail:

Model water retaining height installation mode installation groove section bearing capacity
Hm4e-0012C  1150 embedded installation width1540 * depth: 105  heavy duty (small and medium-sized motor vehicles, pedestrian)

 

Grade Mark Bearing capacity (KN) Applicable occasions
Heavy duty C 125 underground parking lot, car parking lot, residential quarter, back street lane and other areas where only allow non-fast driving zone for small and medium-sized motor vehicles (≤ 20km / h).

Embedded Installation of automatic flood barrier

(1) Embedded installation slot position:

a) It should be set behind the outermost intercepting ditch. Reasons: small water can be discharged through the intercepting ditch; when flood occurs, the municipal pipeline will be backfilled from the intercepting ditch when the water is full.

b) The higher the installation position, the higher the water retaining level.

(2) Discharge capacity of residual water in the installation tank:

a) A 50 * 150 water collecting tank is reserved at the bottom of the installation slot, and a Φ 100 drainage pipe is reserved at the bottom of the water collecting tank.

b) Discharge test: after pouring some water, the water can be discharged smoothly from the drain pipe.

(3) The levelness of the installation surface:

The installation surface horizontal height difference of the two sides should be ≤ 30mm (measured by laser level meter)

(4) The flatness of the installation surface:

According to the quality acceptance code of construction ground engineering GB 50209-2010, the surface flatness deviation should be ≤2mm ( applied 2m guiding ruler and wedge feeler gauge). Otherwise, the ground should be leveled first, or the bottom framework will leak after installation.

(5) Installation surface strength

a) The installation surface is made of at least C20 concrete with thickness ≥Y and the surrounding horizontal extension X ≥300mm or using equivalent strength of installation surface.

b) The installation surface should be free of cracks, hollowing, falling off , etc. The concrete should be qualified for the quality acceptance code of concrete structure engineering GB50204-2015, otherwise, need remade concrete installation surface according to the requirement.

c) In case of concrete, it should beyond curing period.

(6) Side walls

a) Side wall height should be higher than the flood barrier, otherwise it should be created.

b) The side walls should be made of solid brick or concrete or equivalent installation surface. If the wall is of metal or nonmetal material, relevant reinforcement should be applied.

1 (1)

How the hydrodynamic automatic flood barrier retain water

3

Product detail pictures:

Factory source Self Closing Flood Barrier Gate - Embedded flood barrier Hm4e-0012C – JunLi detail pictures

Factory source Self Closing Flood Barrier Gate - Embedded flood barrier Hm4e-0012C – JunLi detail pictures

Factory source Self Closing Flood Barrier Gate - Embedded flood barrier Hm4e-0012C – JunLi detail pictures

Related Product Guide:
continue to enhance, to be certain solution top quality in line with market and buyer standard requirements. Our corporation has a excellent assurance program are actually established for Factory source Self Closing Flood Barrier Gate - Embedded flood barrier Hm4e-0012C – JunLi, The product will supply to all over the world, such as: Adelaide , Qatar , Nicaragua , Our qualified engineering team will usually be prepared to serve you for consultation and feedback. We've been able to also deliver you with absolutely free samples to meet your needs. Best efforts might be made to offer you the ideal service and items. For anyone who is interested in our company and products, be sure to make contact with us by sending us emails or contact us right away. In order to know our solutions and organization. ar more, you can come to our factory to determine it. We are about to usually welcome guests from around the globe to our corporation. o create small business relations with us. Please genuinely feel no cost to speak to us for enterprise. nd we believe we have been gonna share the most effective trading practical experience with all our merchants.

    • The company can keep up with the changes in this industry market, product updates fast and the price is cheap, this is our second cooperation, it's good.
    5 Stars By Abigail from Rwanda - 2018.12.10 19:03
    A nice supplier in this industry, after a detail and careful discussion, we reached a consensus agreement. Hope that we cooperate smoothly.
    5 Stars By Sandy from Brasilia - 2017.05.02 18:28

    RELATED PRODUCTS